Solutions for ALL TYPES OF GATE Frames: Technological Analysis by «KSV Systems»
A universal overview of T-profile and specialized Omega-profile for sliding, swing, cantilever gates, and various architectural structures.
№1: T-profile — base for all gate types№2: 40x20 profile tube
T-profile is an integrated steel product that replaces the classic combination of two square tubes (60x40 and 40x20). It is an effective way to speed up the production of all gate types, although it retains some technological limitations.
- Welding works: Frame fabrication requires a full welding cycle, joint grinding, and anti-corrosion protection of thermal zones.
- Cladding complexity: Every corrugated sheet or other material must be fixed with screws to the inner flange along the entire perimeter.
- No insulation: The geometry of the T-profile does not support sealing elements, which rules out the creation of an airtight structure.
A1 - Inner groove width for fillingA2 - Groove №3 offset
B1 - Profile height for structural rigidity
Omega-profile by «KSV Systems» is an engineering leap in the production of all types of gates and structures. This solution conceptually surpasses the T-profile in all functional aspects, offering a transition to "clean" and rapid assembly.
- Weld-free assembly: The profile is mitre-cut at 45 degrees and mechanically assembled. This keeps the anti-corrosion coating perfectly intact.
- "No Screws" Technology: Insulated sandwich panels are simply inserted into the profile groove. No need to screw each panel individually — the profile securely holds the filling along the entire plane.
- Maximum Sealing: The specialized groove №3 allows for the integration of a rubber seal. This is the only way to achieve truly "warm" and silent gates or doors.
Universal Superiority of the Omega-profile
While the T-profile simply simplifies tube welding, the Omega-profile completely changes the assembly culture for all gate types. You get factory-quality construction without welding or visible fasteners, while ensuring full draft protection thanks to the standard seal.
Selection Parameters for Various Gate Types
We offer customized section settings for your specific tasks:
| Parameter | Description | Functional Role |
|---|---|---|
| Size А1 | Inner groove width | Tailored exactly to the thickness of your sandwich panel or filling material. |
| Size А2 | Groove №3 offset | Allows for adjustment of the seal's pressure against the flashing. |
| Height В1 | Profile gauge (30-55 mm) | Determines the strength characteristics and frame rigidity. |
