1532. Steel end roller AM for sliding gates with end cap 95×81 mm

Galvanized steel end (run-on) roller AM with a support bearing, protective cap, and bumper for cantilever sliding gates. Compatible with 95×81 mm guide rails. Rated for loads up to 800 kg.

The AM end roller is installed inside the guide beam of cantilever sliding gates. When the gate is closed, the roller runs onto the bottom catcher with a bumper, removing the load from the main roller carriages and increasing the reliability and durability of the entire gate system.

The roller is made of galvanized carbon steel and is equipped with a support bearing for smooth and silent operation. The protective cap prevents dirt and moisture from entering the guide beam. Compatible with 95×81 mm guide rails and designed for gate structures weighing up to 800 kg.

Fastening elements material — galvanized carbon steel. The product is not subject to mandatory certification. Made in Ukraine.

Specifications:

• Type: steel end roller for cantilever sliding gates
• Model: 1532
• Guide rail compatibility: 95×81 mm
• Roller material: galvanized carbon steel
• Support bearing: present
• Protective cap: present
• Bumper: present
• Maximum load: up to 800 kg
• Weight: 0.95 kg / pc.
• Country of manufacture: Ukraine
• Certification: not subject to mandatory certification
• Price: per 1 pc