Galvanized steel end (run-on) roller AM No.2 with support bearing, protective cap, and bumper for cantilever sliding gates. Compatible with 70×60 mm guide rail (±2 mm). Designed for loads up to 500 kg.
End roller AM No.2 is installed inside the guide beam of cantilever sliding gates. When the gate is closed, the roller runs onto the lower catcher with a bumper, relieving the load on the main roller carriages and increasing the reliability and service life of the entire gate system.
The roller is made of galvanized carbon steel and equipped with a support bearing for smooth and quiet operation. The protective cap prevents dirt and moisture from entering the guide beam. Compatible with 70×60 mm guides (±2 mm) and intended for gate structures weighing up to 500 kg.
Mounting elements are made of galvanized carbon steel. The product is not subject to mandatory certification. Made in Ukraine.
