End roller for 95×81 mm beam

Polymer end (run-on) roller with a galvanized bracket, designed for cantilever sliding gates. Compatible with 95×81 mm guide rails. Rated for loads up to 800 kg.

The end roller is installed inside the guide beam of cantilever sliding gates. When the gate is closed, the roller runs onto the bottom catcher with a shelf, removing the load from the main roller carriages and significantly extending their service life.

The roller is made of impact-resistant, wear-resistant polymer and does not have a support bearing. A galvanized steel bracket is included in the set. Compatible with 95×81 mm guide rails. Designed for gate structures weighing up to 800 kg.

Bracket material — galvanized carbon steel. The product is not subject to mandatory certification. Made in Ukraine.

Specifications:

• Type: end roller for cantilever sliding gates
• Model: 1510
• Gate type: cantilever
• Guide rail compatibility: 95×81 mm
• Bracket material: galvanized carbon steel
• Roller material: wear-resistant impact-resistant polymer
• Maximum load: up to 800 kg
• Weight: 0.5 kg / pc
• Country of manufacture: Ukraine
• Certification: not subject to mandatory certification
• Price: per 1 pc