End Roller No.2 70×60 mm

Polymer end (run-on) roller with a galvanized mounting bracket, designed for cantilever sliding gates. Compatible with 70×60 and 69×58 mm guide rails. Rated load capacity up to 400–500 kg.

End Roller No.2 is installed inside the guide beam of cantilever sliding gates. When the gate is closed, the roller runs onto the lower catcher with shelf, reducing the load on the main roller carriages and significantly extending their service life.

The roller is made of impact-resistant, wear-resistant polymer and does not include a support bearing. Supplied with a galvanized steel mounting bracket. Compatible with 70×60 mm guide rails (±2 mm tolerance) and 69×58 mm profiles. Designed for gate structures weighing up to 500 kg.

Bracket material — galvanized carbon steel. The product is not subject to mandatory certification. Made in Ukraine.

Specifications:

• Type: end roller for cantilever sliding gates
• Model: No.2
• Gate type: cantilever
• Guide rail compatibility: 69×58 mm / 70×60 mm
• Bracket material: galvanized carbon steel
• Roller material: wear-resistant impact-resistant polymer
• Maximum load: up to 500 kg
• Weight: 0.44 kg / pc
• Country of origin: Ukraine
• Certification: not subject to mandatory certification

Price: per 1 pc