1540. End Roller M No.2 Steel for Sliding Gates 70×60 mm

Galvanized steel end (run-on) roller M No.2 with support bearing for cantilever sliding gates. Compatible with 70×60 mm guide rail (±2 mm). Designed for loads up to 500 kg.

End roller M No.2 is installed inside the guide beam of cantilever sliding gates. When the gate is closed, the roller runs onto the lower catcher, reducing the load on the main roller carriages and increasing the reliability and service life of the entire gate system.

The roller is made of galvanized carbon steel and equipped with a support bearing for smooth and quiet operation. Compatible with 70×60 mm guide rails (±2 mm) and intended for gate structures weighing up to 500 kg.

Mounting elements are made of galvanized carbon steel. The product is not subject to mandatory certification. Made in Ukraine.

Specifications:

• Type: steel end roller for cantilever sliding gates
• Model: M No.2
• Guide rail compatibility: 70×60 mm (±2 mm)
• Roller material: galvanized carbon steel
• Support bearing: present
• Maximum load: up to 500 kg
• Weight: 0.7 kg / pc
• Country of origin: Ukraine
• Certification: not subject to mandatory certification
• Price: per 1 pc